GE Measurement & Control SolutionsGE Measurement & Control

E-mail Print

DXR500L Static Digital Detector Array

DXR500L Static Digital Detector Array

Utilizing Endurance scintillator technology, the DXR500L static digital detector array is able to provide the premium image quality of a CsI detector without the typical lag limitations of CsI. Designed for industrial use, the DXR500L provides the highest image quality in a rugged production environment. The DXR500L allows for easy detection of subtle indications. Utilizing Endurance™ technology, developed specifically to reduce radiation wear out and to maximize cost savings. GE's detectors incorporate a temperature controller, allowing for longer calibration intervals and quick, consistent images. DXR500L provides application results efficiently with a cycle time reduction.

Contact Sales

 

 

 

 

 

 

Features

Key Features & Benefits

  • High-resolution images for easy detection of subtle indications
  • Endurance™ scintillator technology for optimal image quality and lag
  • Temperature controlled for stable offsets over longer periods, enabling more consistent imaging and fewer calibrations

Detector Characterization Charts

The detector characterization charts provided below are completed in accordance to ASTM E2597-07 Standard Practice for the Manufacturing Characterization of Digital Detector Arrays. This standard allows for the direct comparison of DDAs by ensuring data is collected and reported in a consistent and specified manner. The standard also enables guidance for the appropriate pairings of detectors with applications.

Pixels are identified as bad per one or more of the seven definitions described in the ASTM E2597-07 document. The pixels marked as bad will be corrected through GE’s software utilizing data collected from good neighborhood pixels.

Charaterization Chart

Applications

  • Aerospace investment castings
  • Industrial gas turbine investment castings
  • Wax and ceramic patterns
  • Metrology
  • Materials science/geology

Specifications

Detector

Flat Panel Type Amorphous Silicon
Scintillator Material CsI
Active Area (approx.) 307 x 240 mm (12 x 9 in)
Image Format 3072x2400
Pixel Pitch 100µm
A/D Conversion 14 bits
Minimum Exposure Time 375ms
Interface Gigabit Ethernet
Dynamic Range 10,000:1
Dimensions 356 x 360 x 122.5mm
Weight 15 kg (33 lb)
Operating Temperature 10° to 35° C (50° to 95° F)
Operating Humidity 10-90% non-condensing

Power Supply

Voltage 100-240V, 50-60Hz
UT Output Connector 163 x 287 x 56 mm (6 x 11 x 2 in)
Weight 3 kg (7 lb)

Temperature Controller

Voltage 100-240V, 50-60Hz
Dimensions 220 x 286 x 382 mm (9 x 11 x 15 in)
Weight 8 kg (19 lb)

Download

Descriptions English Deutsch RU Español
Corrosion Erosion Brochure acrobat-reader acrobat-reader
DXR500L acrobat-reader
Industrial Radiography Image Forming Techniques acrobat-reader
Inspection Technologies Brochure acrobat-reader acrobat-reader acrobat-reader


acrobat-reader